LaserLine GR1450T 15' Laser Lenker Style Direct reading Rod Ft/10ths (ea)

LaserLine GR1450T 15' Laser Lenker Style Direct reading Rod Ft/10ths (ea)

FLT P/N #:LLMGR1450T flt inventory status In Stock
List Price: $278.00 Your Price: $259.95
      

LaserLine GR1450T 15' Laser Lenker Style Direct reading Rod Ft/10ths
Click on the image for a larger view.
 

The GR1450T 15' Lenker Style direct reading level rod, gradations in feet/tenths, allows you directly observe the true elevation of any point on the jobsite without any performing any calculations.

Designed for use with a laser level and receiver (it has a track to allow the receiver to slide up and down the rod), the GR1000T can also be used with an optical level.

Simply set the reading on the rod to match the elevation of a known elevation such as a benchmark or hub. This is possible because the rod face is actually a continous flexible tape mounted on rollers within the frame of the rod which can be locked down once set. From then on, every elevation reading around the jobsite can be read directly by noting where the pointer of your laser detector is when you get the "on grade" signal, or through your optical level.

FEATURES:

The Laser Line GR10T Direct Reading grade rod is made of high strength clear anodized aluminum for lightweight rugged, dependable operation. It will not rust, split, splinter swell or warp in any environment.

The tape has a heavy duty matte textured face which is easy on the eyes in bright sunlight and protects the tape numbers from wear and fading.

Tape lock grommets are oversized,
heavy duty brass. This greatly minimizes the problem of tape tearing.

Detector rail is black, high density, U.V.stabilized for long life. It is specifically designed to not become brittle when exposed to ultraviolet rays or direct sunlight.

The solid tape lock has an internal brake slide for stronger, trouble-free operation.


DIRECTIONS FOR USING THE GR1000T DIRECT READING ROD:

1. Set rod foot on a benchmark or hub with a known elevation; i.e. 2,525.25 elevation.

2. Run the laser receiver up or down the side of the rod and / or raise or lower front rod section until
you get the “on grade” signal on your laser detector. If you are using an optical instrument, site to
the rod and use the horizontal line as your grade reference.

3. Loosen the tape lock pin (lower knob) and disengage the tape pin from the grommet.

4. Roll the tape face until 5.25 is across from the pointer on the laser detector bracket, or the horizontal line on your optical instrument. You are using the last whole number and the decimal numbers of 2,525.25.

5. Lock the tape by engaging the tape lock pin into the nearest grommet. Then tighten the knob. You have now locked into the rod elevation (2,525.25). All future readings will be true elevation above or below 2,525.25 (5.25).

6. To find an elevation, simply set the rod foot at any location on the job within the range of your laser
or optical instrument. Run the detector and / or front rod section up or down until you pick up the
“on grade” signal from your detector. Read the number opposite the pointer. That number is your true elevation. If using an optical instrument, just read the number across the horizontal line. That number is your true elevation.

EXAMPLE:
Rod reading is 6.10 = 2,526.10 true elevation
Rod reading is 8.32 = 2,528.32 true elevation
Rod reading is 4.70 = 2,524.70 true elevation



View/Download Directions for using a direct reading rod
View/Download Laserline brochure

 


Related Products

Rod Level
SOK724190
Rod Level

$15.95 $12.95

 

LaserLine GR1450T 15' Laser Lenker Style Direct reading Rod Ft/10ths
$ 259.95 New In Stock

 

 


Leica spectra precision topcon northwest instrument pls carlson software CST Berger Seco Schonstedt sokkia pacific crest level best